why repair strip easily be scraped from belt cleaner when conveyor
After repair strip bonds on repair strip, and we start the conveyor, at this time,
repair strip be scraped from belt cleaner, then some workers will
complain the products quality is not good, because the belt cleaner
works well at before.
In fact not, the situation contains a lot, we can not say the
repair strip and the glue doesn’t have good quality, we should find
reasons from all aspects.
Traditional glue is flammable, and not have good bonding strength
and have limitations.
At present, we repair conveyor belt usually applies traditional
universal glue, at before this kind glue is truly good, it can
bonds all kinds of products, but in pace with the change of
traditional technologies, the material of conveyor belt is changed
from rubber to compound rubber, once it contains the special
material such as PVC material, traditional universal glue will be
New model cold vulcanization glue SK313 is non-flammable, high bonding strength and low material
Cold vulcanization glue SK313 is safe and non-flammable, which suitable for ground and
underground operation, whose excellent bonding strength far more
exceed Germany DIN industrial standard, which have the same grade
with traditional hot vulcanization bonding strength, during the
cold seamless bonding, whose bonding strength that can exceed the
hot vulcanization bonding strength, while we do emergency repair,
no need for any big equipment, once repair that can use it
The sanding depth of repair part that should be bigger than the
thickness of repair strip.
Because the little space between belt cleaner and conveyor belt, so
the sanding depth should be bigger than the thickness of repair
strip.(such as 150 reinforced repair strip, the thickest part is
4.6mm, so the sanding depth should be 4.6mm), while bonding, we
should choose embedded way that can avoid the bonding part be
scraped by belt cleaner.
Except above notice, one should obey the conveyor belt repair
technology and standard, such as repair part sanding, keep sanding
part dry and clean, that can keep the whole process goes smoothly.